Poulan 414659 Manual do Utilizador

OWNER'S MANUALMODEL NUMBER:PP10530ESSNOW THROWER Always Wear Eye Protection During OperationIMPORTANT MANUAL Do Not Throw Away WARNING:Read the

10OPERATIONTO THROW SNOW (See Fig. 14)The auger rotation is controlled by the auger control lever located on the right side handle.• Squeeze auger co

11TO ADJUST SKID PLATES (See Fig. 17)NOTE: The wrench provided in your parts bag may be used to adjust the skid plates.Skid plates are located on each

12OPERATIONCOLD START - ELECTRIC STARTER1. Insert safety ignition key (packed separately in parts bag) into ignition slot until it clicks. DO NOT tu

13GENERAL REC OM MEN DA TIONSThe warranty on this snow thrower does not cover items that have been sub ject ed to operator abuse or negligence. To re

14MAINTENANCEAUGER GEAR CASE• The gear case was filled with lubricant to the proper level at the factory. The only time the lubricant needs attention

15CAUTION: Do not substitute. Use only original equip ment capscrew/shear bolts as sup plied with your snow thrower.4. Connect spark plug wire to spa

16BELT KEEPERIDLER ARM SQUARE HOLEBOLTTRACTION DRIVE BELTCLUTCHING IDLER ARM BRACKETAUGER BELTFLAT WASHERAUGER PULLEYAUGERHOUSINGFRAMEENGINEPULLEYLOCK

17SERVICE AND ADJUSTMENTSSTORAGEImmediately prepare your unit for storage at the end of the season or if the unit will not be used for 30 days or more

18Does not start 1. Fuel shut-off valve (if so 1. Turn fuel shut-off valve to OPEN position. equipped) in OFF position. 2. Safety ignition

19SERVICE NOTES

2IMPORTANTSafe Operation Practices for Walk-Behind Snow ThrowersThis snow thrower is capable of amputating hands and feet and throwing objects.Failure

20REPAIR PARTS SNOW THROWER - MODEL PP10530ES (96192001800)AUGER HOUSING / IMPELLER ASSEMBLY6659912778611571013414161536375047424244272743434638454

21KEY PART NO. NO. DESCRIPTION 4 191079 Pulley, Impeller 5 188909 Bearing Assembly, Flange 6 155377 Nut, Hex Flange 5/16-18 7 1803

22REPAIR PARTS SNOW THROWER - MODEL PP10530ES (96192001800)CONTROL PANEL / DISCHARGE CHUTE321261922262827272520297456881618171014313159111222232223

23REPAIR PARTS SNOW THROWER - MODEL PP10530ES (96192001800)CONTROL PANEL / DISCHARGE CHUTEKEY PART NO. NO. DESCRIPTION 1 414280 Knob, Leve

24REPAIR PARTS SNOW THROWER - MODEL PP10530ES (96192001800)HANDLES323132303112101113151511161716232227272217111515143839407636255144448282891819262

25KEY PART NO. NO. DESCRIPTION 1 405999X479 Lever, Auger Control, RH 2 405783X479 Lever, Traction Drive Control 4 178888 Bushing, Fla

26REPAIR PARTS SNOW THROWER - MODEL PP10530ES (96192001800)DRIVE44444224311112255522204121171336141918181524363534373191223262925443328322744

27REPAIR PARTS SNOW THROWER - MODEL PP10530ES (96192001800)DRIVENOTE: All component dimensions given in U.S. inches. 1 inch = 25.4 mmIMPORTANT

28REPAIR PARTS SNOW THROWER - MODEL PP10530ES (96192001800)CHASSIS / ENGINE / PULLEYS61917102122232346912152726252418720302931315810212857653178131

29REPAIR PARTS SNOW THROWER - MODEL PP10530ES (96192001800)CHASSIS / ENGINE / PULLEYSNOTE: All component dimensions given in U.S. inches. 1 in

3CONGRATULATIONS on your purchase of a new snow thrower. It has been designed, engineered and man u fac -tured to give best possible dependability an

30REPAIR PARTS SNOW THROWER - MODEL PP10530ES (96192001800)WHEELS / DECALS7323032301518171913201127271916201111111114151213181412443134342832133222

31KEY PART NO. NO. DESCRIPTION 1 192092X421 Wheel Assembly, 16", Power Steering, LH 2 155443 Pin, Klik 1/4 3 405161 Cover, Pow

LIMITED WARRANTYThe Manufacturer warrants to the original consumer purchaser that this product as manufactured is free from defects in materials and w

4PARTS PACKED SEPARATELY IN CARTONASSEMBLY / PRE-OPERATIONRead these instructions and this manual in its entirety before you attempt to assemble or op

5ASSEMBLY / PRE-OPERATIONNOTE: The multi-wrench may be used for assembly of the chute rotator head to snow thrower and making ad just ments to the ski

6ASSEMBLY / PRE-OPERATIONINSTALL DISCHARGE CHUTE / CHUTE ROTATOR HEAD (See Fig. 7)NOTE: The multi-wrench provided in your parts bag may be used to ins

7OPERATIONKNOW YOUR SNOW THROWERREAD THIS OWNER'S MANUAL AND ALL SAFETY RULES BEFORE OPERATING YOUR SNOW THROWER. Compare the illustrations with

8OPERATIONThrottle/engine control - used to se lect either FAST or SLOW engine speed and to STOP the engine.Traction drive control lever - used to eng

9The operation of any snow thrower can result in foreign objects thrown into the eyes, which can result in severe eye damage. Always wear safety glas