Poulan 192046 Manual do Utilizador

OWNER'S MANUALMODEL NUMBER:PP1130ESCSNOW THROWER Always Wear Eye Protection During OperationIMPORTANT MANUAL D

10OPERATION00155FIG. 15DISCHARGE CHUTECONTROL LEVER CHUTE DEFLECTORREMOTE CONTROL LEVERTO USE CHOKE CON TROL (See Fig. 14)The choke con trol is locate

11OPERATIONTO THROW SNOW (See Fig. 16)The auger rotation is controlled by the auger control lever located on the right side handle.• Squeeze auger

12TO START ENGINE • Be sure fuel shut-off valve is in the OPEN position.TO ADJUST SKID PLATES (See Fig. 20)NOTE: The wrench provided in your part

13Your snow thrower engine is equipped with both a 120 Volt A.C. electric starter and a recoil starter. The electric starter is equipped with a three

14MAINTENANCELUBRICATION CHARTGENERAL REC OM MEN DA TIONSThe warranty on this snow thrower does not cover items that have been sub ject ed to operator

15MAINTENANCEV-BELTSCheck V-belts for deterioration and wear after every 50 hours of operation and replace if necessary. The belts are not ad just abl

16SERVICE AND ADJUSTMENTSWARNING: To avoid serious injury, before performing any service or ad- just ments:1. Be sure throttle is in STOP position.2.

17SERVICE AND ADJUSTMENTSTO REPLACE BELTS (See Fig. 25)The auger and traction drive belts are not adjustable. If the belts are damaged or begin to sli

18STORAGEImmediately prepare your snow thrower for storage at the end of the season or if the unit will not be used for 30 days or more.WARNING: Never

19Does not start 1. Fuel shut-off valve (if so 1. Turn fuel shut-off valve to OPEN position.

2Safe Operation Practices for Snow ThrowersIMPORTANT: This machine is capable of amputating hands and feet and throwing objects. Failure to observe t

giving the complete mfg. ID#, serial number and date of purchase of your product and the name and address of the authorized dealer from whom it was pu

3PRODUCT SPECIFICATIONSGasoline Capacity 4.0 Quartsand Type: Unleaded Regular onlyOil Type SAE 30 (above 40°F)(API SG

4PARTS PACKED SEPARATELY IN CARTONMAINTENANCE ... 14-15MAINTENANCE SCHEDULE ...

5ASSEMBLY / PRE-OPERATIONRead these instructions and this man u al in its entirety before you attempt to assemble or operate your new snow thrower.You

6ASSEMBLY / PRE-OPERATIONCHUTEROTATER HEAD3/8 WASHER3/8 LOCKNUTTHREADED STUDPINROTATER HEAD MOUNT ING BRACKETCHUTE BRACKETFIG. 7TRACTION DRIVE CON TR

7ASSEMBLY / PRE-OPERATIONINSTALL CHUTE DEFLECTOR REMOTE CONTROL (See Figs. 8 and 9)1. Install remote cable bracket to discharge chute with5/16-18 ca

8OPERATIONKNOW YOUR SNOW THROWERREAD THIS OWNER'S MANUAL AND ALL SAFETY RULES BEFORE OPERATING YOUR SNOW THROWER. Compare the illustrations wit

9MEETS A.N.S.I. SAFETY REQUIREMENTSOur snow throwers conform to the standards of the American National Standards Institute.FIG. 11OPERATIONDrive speed